Display Bgp Vpnv6 Vpn-Instance Peer - HP 5800 series Command Reference Manual

BGP Local router ID is 30.30.30.30.1
Status codes: * - valid, ^ - VPN best, > - best, d - damped,
*^ i Network : 30:30::
NextHop : ::FFFF:101:102
PrefVal : 0
MED
Path/Ogn: ?
Table 13 Command output
Field
BGP Local router ID
Status codes
Origin
Network
PrefixLen
NextHop
LocPrf
PrefVal
Label
MED
Path/Ogn

display bgp vpnv6 vpn-instance peer

Description
Use the display bgp vpnv6 vpn-instance peer command to display information about the IPv6 BGP peers
in the specified VPN instance.
If you do not specify any optional parameters, the command displays the brief information of all IPv6
BGP peers.
Syntax
display bgp vpnv6 vpn-instance vpn-instance-name peer [ ipv6-address verbose | verbose ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
: 0
Description
Router ID of the local BGP router
Route status codes
Route origin codes
Destination network address
Prefix length of the destination network address
IPv6 address of the next hop
Local preference value
Preference value of the route
Received label
Metric associated with the destination network
AS_PATH attribute/route origin of the route
PrefixLen : 64
LocPrf
Label
34
: 100
: 1025