Display Isis Traffic-Eng Statistics - HP 5800 series Command Reference Manual

display isis traffic-eng statistics

Description
Use the display isis traffic-eng statistics command to display the statistics about TE for IS-IS.
If you do not specify an IS-IS level, the statistics about TE in the IS-IS Level- 1 -2 area is displayed.
Syntax
display isis traffic-eng statistics [ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Specifies the IS-IS process ID, ranging from 1 to 65,535.
vpn-instance vpn-instance-name: Displays the IS-IS TE statistics for the specified VPN. The vpn-instance-
name parameter specifies an MPLS L3VPN by its instance name, which is a case-sensitive string of 1 to
31 characters. To display the IS-IS TE statistics for the public network, do not specify this keyword and
parameter combination.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display statistics about TE for IS-IS.
<Sysname> display isis traffic-eng statistics
TE Statistics Information
-------------------------
IS-IS System Type
IS-IS Cost Style Status
IS-IS Level-1 Traffic Engineering Status
IS-IS Level-2 Traffic Engineering Status
IS-IS Router ID
Table 47 Command output
Field
IS-IS System Type
IS-IS Cost Style Status
TE information for ISIS(1)
--------------------------
: Level-1-2
: Wide
: Disabled
: Enabled
: 1.1.1.9
Description
System type
Cost type of the router
123