Display Mpls Lsp Bfd Ipv4 - HP 5800 series Command Reference Manual

Label Operation
-------------------------------------------------------------
-------------------------------------------------------------
No.
VrfIndex
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Tunnel ID
LsrType
Outgoing Tunnel ID
Label Operation
Table 32 Command output
Field
Fec
Tunnel ID
LsrType
Outgoing Tunnel ID
Label Operation

display mpls lsp bfd ipv4

Description
Use the display mpls lsp bfd ipv4 command to display the BFD information for LSPs.
Syntax
display mpls lsp bfd [ ipv4 destination-address mask-length ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
: POP
LSP Information: LDP LSP
: 1
:
: 1.1.1.9/32
: 127.0.0.1
: 3
: NULL
: ----------
: ----------
: 10241
: 0x0
: Egress
: 0x0
: POP
Description
Forwarding equivalence class, in either of the
following two forms:
•
IP address/mask: Assigning labels based on
destination addresses.
•
IP address: Assigning labels based on the
addresses of the next hops.
Tunnel ID (the public network).
Role of the LSR for the LSP, which can be Ingress,
Transit, or Egress.
Tunnel ID (inter-AS VPN).
Label operation performed, which can be POP,
PUSH, or SWAP.
73