Display Mpls L2Vpn - HP 5800 series Command Reference Manual

Tunnel ID
Table 98 Command output
Field
VC ID
VC State
Destination
Client Intf
Local Group ID
Remote Group ID
Tunnel Policy
Tunnel Type
Tunnel ID
# Display information about Martini VCs received from the remote peer.
<Sysname> display mpls l2vc remote-info
total remote ldp vc : 1
Transport
VC ID
100
Table 99 Command output
Field
total remote ldp vc
Transport VC ID
Group ID
Peer Addr
Remote Encap
C Bit
Remote MTU

display mpls l2vpn

Description
Use the display mpls l2vpn command to display information about L2VPNs configured on a PE.
If you do not specify a VPN, the command displays information about all L2VPNs.
: 0x220020
Group Peer
ID Addr
0 3.3.3.9
Description
Remote VC ID
Status of the VC
Destination IP address
Interface connected with the CE
Local VC group ID, used for the L2VPN VC FEC TLV
field of LDP messages
Remote VC group ID, used for the L2VPN VC FEC
TLV field of LDP messages
Tunnel policy configured
Type of the tunnel
ID of the tunnel
Remote Remote
Encap VC Label
ethernet 1025
Description
Total number of remote LDP VCs.
Remote VC ID.
Remote VC group ID, used for the L2VPN VC FEC
TLV field of LDP messages.
IP address of the peer.
Encapsulation type of the remote interface.
Whether the control word function is enabled or not.
0 means disabled and 1 means enabled.
MTU of the remote interface.
246
C Remote
Bit MTU
0 1500