Display Bgp Vpnv4 Vpn-Instance Network - HP 5800 series Command Reference Manual

Field
Configured hold timer value
Keepalive timer value
Minimum time between advertisement
runs
Local
Peer Preferred Value
No routing policy is configured
Peer
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State

display bgp vpnv4 vpn-instance network

Description
Use the display bgp vpnv4 vpn-instance network command to display information about the BGP VPNv4
routes injected into a specific VPN instance or all VPN instances.
Syntax
display bgp vpnv4 vpn-instance vpn-instance-name network [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the instance
name of a VPN, which is a case-sensitive string of 1 to 31 characters.
Description
Setting of the hold timer.
Keepalive interval.
Minimum route advertisement interval.
Indicates whether the local device supports sending and receiving
Route-refresh packets with ORF information. The value can be:
•
Both—Supports sending and receiving Route-refresh messages
with ORF information.
•
Send—Supports sending Route-refresh messages with ORF
information.
•
Receive—Supports receiving Route-refresh messages with ORF
information.
Weight for the routes from the peer.
Whether the VPN instance is configured with a routing policy.
IP address of the peer.
AS number of the peer group.
Number of messages received.
Number of messages sent.
Number of messages waiting to be sent to the peer.
Number of prefixes received.
Duration of the BGP session in the current state.
Status of the peer.
3