Reset Bgp Ipv6 Vpn-Instance; Routing-Table Limit - HP 5800 series Command Reference Manual

reset bgp ipv6 vpn-instance

Description
Use the reset bgp ipv6 vpn-instance command to reset IPv6 BGP connections in a VPN instance.
Syntax
reset bgp ipv6 vpn-instance vpn-instance-name { as-number | ipv6-address | all | external }
View
User view
Default level
1: Monitor level
Parameters
vpn-instance-name: Resets IPv6 BGP connections with the peers in a VPN instance. The VPN instance
name is a case-sensitive string of 1 to 31 characters.
as-number: Resets IPv6 BGP connections with the peers in an AS. The AS number is ranging from 1 to
4,294,967,295.
ipv6-address: Resets the connection with the BGP peer identified by this IPv6 address.
all: Resets all IPv6 BGP connections in the specified VPN instance.
external: Resets EBGP sessions.
Examples
# Reset all IPv6 BGP connections in VPN instance vpn1.
<Sysname> reset bgp ipv6 vpn-instance vpn1 all

routing-table limit

Description
Use the routing-table limit command to limit the maximum number of routes in a VPN instance, an IPv4
VPN, or an IPv6 VPN, thus preventing too many routes from being accepted by a PE.
Use the undo routing-table limit command to restore the default.
The default maximum number of routes supported varies by device.
A limit configured in VPN instance view is applicable to both the IPv4 VPN and the IPv6 VPN.
•
A limit configured in IPv6 VPN view is applicable to only the IPv6 VPN.
•
A limit configured in IPv6 VPN view takes precedence over that configured in VPN instance view. If
•
you configure a limit in both IPv6 VPN view and VPN instance view, the limit configured in IPv6
VPN view is applied to the IPv6 VPN.
Syntax
routing-table limit number { warn-threshold | simply-alert }
undo routing-table limit
View
VPN instance view, IPv6 VPN view
46