Display Mpls Te Cspf Tedb - HP 5800 series Command Reference Manual

Field
State
# Display detailed information about all static CR-LSPs.
<Sysname> display mpls static-cr-lsp verbose
No
LSP-Name
LSR-Type
FEC
In-Label
Out-Label
In-Interface
Out-Interface
NextHop
Lsp Status
Table 60 Command output
Field
LSP-Name
LSR-Type
FEC
In-Label
Out-Label
In-Interface
Out-Interface
NextHop
Lsp Status

display mpls te cspf tedb

Description
Use the display mpls te cspf tedb command to display information about CSPF-based TEDB by specified
criteria.
Syntax
display mpls te cspf tedb { all | area area-id | interface ip-address | network-lsa | node [ mpls-lsr-id ] }
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
: 1
: Tunnel0
: Ingress
: 3.3.3.3/32
: NULL
: 20
: -
: Vlan-interface2
: 2.1.1.2
: Up
Description
Current state of the CR-LSP
Description
Static CR-LSP name
Role of the LSR in the LSP: ingress, transit, or egress
FEC
Incoming label
Outgoing label
Incoming interface
Outgoing interface
Next hop address
Status of the LSP
141