Display Mpls Rsvp-Te Established - HP 5800 series Command Reference Manual

Field
Authentication
Reliability
Retransmit interval
Increment value

display mpls rsvp-te established

Description
Use the display mpls rsvp-te established command to display information about RSVP-TE tunnels.
Syntax
display mpls rsvp-te established [ interface interface-type interface-number ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify an interface, the command displays the RSVP-TE tunnel information of all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display RSVP-TE tunnel information for interface VLAN-interface 3.
<Sysname> display mpls rsvp-te established interface vlan-interface 3
Interface Vlan-interface3
Token Bucket Rate: 0.00
Tunnel Dest: 2.2.2.2
Local LSP ID: 4
Next Hop Addr: 80.4.1.1
Upstream Label: 1024
Description
State of authentication: enabled or disabled.
Whether the reliability feature is configured: yes or no.
Initial retransmission interval (in milliseconds).
Increment value delta that governs the speed at which the interface
increases the retransmission interval.
Assume the initial interval is Rf seconds. If the interface does not
receive an ACK message for a packet within this interval, it
retransmits the packet after (1 + Increment value) × Rf seconds.
Peak Data Rate: 0.00
Ingress LSR ID: 3.3.3.3
Session Tunnel ID: 4
Downstream Label: 3
127