Static-Lsp Ingress - HP 5800 series Command Reference Manual

Commands and command syntax options
Hide thumbs Also See for 5800 series:
Table of Contents

Advertisement

incoming-interface interface-type interface-number: Specifies an incoming interface by its type and
number.
in-label in-label: Specifies the incoming label, which can be 0, 3, or a value ranging from 16 to 1023.
Examples
# Configure a static LSP named bj-sh, taking the current LSR as the egress, VLAN-interface 2 as the
incoming interface, and 233 as the incoming label.
<Sysname> system-view
[Sysname] static-lsp egress bj-sh incoming-interface vlan-interface 2 in-label 233

static-lsp ingress

Description
Use the static-lsp ingress command to configure a static LSP taking the current LSR as the ingress.
Use the undo static-lsp ingress command to remove a static LSP taking the current LSR as the ingress.
If you specify the next hop when configuring a static LSP, and the address of the next hop is present in the
routing table, you also need to specify the next hop when configuring the static IP route.
The address of the next hop cannot be any local public network IP address.
Related commands: display mpls static-lsp, static-lsp egress, and static-lsp transit.
Syntax
static-lsp ingress lsp-name destination dest-addr { mask | mask-length } nexthop next-hop-addr out-label
out-label
undo static-lsp ingress lsp-name
View
System view
Default level
2: System level
Parameters
lsp-name: Specifies the name for the LSP, which is a string of 1 to 15 characters.
destination dest-addr: Specifies the destination IP address of an LSP.
mask: Specifies the mask of the destination IP address.
mask-length: Specifies the length of the mask for the destination address, ranging from 0 to 32.
nexthop next-hop-addr: Specifies the next hop address.
out-label out-label: Specifies the outgoing label, which can be 0, 3, or a value ranging from 16 to 1023.
Examples
# Configure a static LSP named bj-sh to destination address 202.25.38.1/24, taking the current LSR as
the ingress, 202.55.25.33 as the next hop address, and 237 as the outgoing label.
<Sysname> system-view
[Sysname] static-lsp ingress bj-sh destination 202.25.38.1 24 nexthop 202.55.25.33 out-
label 237
109

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5820x series

Table of Contents