Display Mpls Rsvp-Te Psb-Content - HP 5800 series Command Reference Manual

Interface Vlan-interface4
Neighbor Addr: 80.2.1.1
SrcInstance: 832
PSB Count: 1
Hello Type Sent: REQ
SRefresh Enable: NO
Graceful Restart State: Not Ready
Restart Time: ---
Table 52 Command output
Field
Interface
Neighbor Addr:
SrcInstance
NbrSrcInstance
PSB Count
RSB Count
Hello Type Sent
Neighbor Hello Extension
SRefresh Enable
Reliability Enable
Graceful Restart State
Restart Time
Recovery Time

display mpls rsvp-te psb-content

Description
Use the display mpls rsvp-te psb-content command to display information about RSVP-TE PSB.
Syntax
display mpls rsvp-te psb-content ingress-lsr-id lspid tunnel-id egress-lsr-id [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ingress-lsr-id: Specifies the ingress LSR ID.
NbrSrcInstance: 920
RSB Count: 0
Neighbor Hello Extension: ENABLE
Reliability Enable: YES
Recovery Time: ---
Description
RSVP-TE enabled interface.
Neighbor address, in the format of X.X.X.X.
Instance of source Message ID.
Instance of neighbor Message ID.
Number of path state blocks.
Number of reservation state blocks.
Type of hellos sent to the neighbor: REQ, ACK, or NONE.
State of hello extension: enabled or disabled. This field is displayed
only when hello extension is enabled on the interface.
State of summary refresh: YES for enabled and NO for disabled.
State of the reliability function: YES for enabled and NO for disabled.
Neighbor's GR status: Not Ready, Ready, Restart, or Recovery.
Displayed as --- when not supported by the device.
GR restart interval in seconds.
GR recovery interval in seconds.
129