Display Mpls Te Tunnel Statistics - HP 5800 series Command Reference Manual

Table 68 Command output
Field
Tunnel Interface Name
Lsp ID
Hop 0
Hop 1
Hop 2

display mpls te tunnel statistics

Description
Use the display mpls te tunnel statistics command to display statistics about MPLS TE tunnels.
Syntax
display mpls te tunnel statistics [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display statistics about MPLS TE tunnels.
<Sysname> display mpls te tunnel statistics
Ingress:
Transit:
Egress :
Table 69 Command output
Field
Ingress
Transit
Egress
0 Tunnels, 0 Tunnels Up,
0 Modified, 0 In-Progress,
0 Up
0 Up
Description
Tunnel interface name
LSP ID
Hop 0 on the path
Hop 1 on the path
Hop 2 on the path
0 CRLSPs Up
0 Failed
Description
This device is the tunnel ingress.
This device is a transit node on the tunnel.
This device is the tunnel egress.
149