Mpls Te Record-Route; Mpls Te Reoptimization (Tunnel Interface View) - HP 5800 series Command Reference Manual

<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te priority 1

mpls te record-route

Description
Use the mpls te record-route command to enable route recording or label recording.
Use the undo mpls te record-route command to restore the default.
By default, route recording and label recording are disabled.
Syntax
mpls te record-route [ label ]
undo mpls te record-route
View
Tunnel interface view
Default level
2: System level
Parameters
label: Includes the record of labels in the route record.
Examples
# Enable route recording on MPLS TE tunnel 0.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te record-route

mpls te reoptimization (tunnel interface view)

Description
Use the mpls te reoptimization command to enable reoptimization on the tunnel.
Use the undo mpls te reoptimization command to disable reoptimization on the tunnel.
Reoptimization is disabled by default.
The reoptimization function cannot be used together with these commands: mpls te route-pinning, mpls te
backup, and mpls te resv-style ff.
Syntax
mpls te reoptimization [ frequency seconds ]
undo mpls te reoptimization
View
Tunnel interface view
Default level
2: System level
185