Display Mpls L2Vc - HP 5800 series Command Reference Manual

regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about interfaces of any encapsulation types.
<Sysname> display l2vpn ccc-interface vc-type all
Total ccc-interface of CCC VC: 3
up (3), down (0)
Interface
Vlan2
Vlan3
Vlan4
# Display information about interfaces of Kompella L2VPN VCs.
<Sysname> display l2vpn ccc-interface vc-type bgp-vc
Total ccc-interface of BGP VC: 1
up (1), down (0)
Interface
Vlan3
# Display information about interfaces of SVC L2VPN VCs that are in the state of UP.
<Sysname> display l2vpn ccc-interface vc-type svc-vc up
Total ccc-interface of SVC VC: 1,
up (1), down (0)
Interface
Vlan4
Table 96 Command output
Field
Total ccc-interface of XXX VC
Interface
Encap Type
State
VC Type

display mpls l2vc

Description
Use the display mpls l2vc command to display information about Martini VCs configured on the router.
If you specify an interface, the command displays information about Martini VCs configured on the CE
interface.
Syntax
display mpls l2vc [ interface interface-type interface-number [ service-instance instance-id ] | remote-info ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Encap Type State
ethernet up
ethernet up
ethernet up
Encap Type State
ethernet up
Encap Type State
VLAN up
VC Type
CCC
bgp-vc
static-vc
VC Type
bgp-vc
VC Type
static-vc
Description
Total interface number of L2VPN VCs of type xxx
Name of the interface
Encapsulation type of the interface
Status of the interface
Encapsulation type of the L2VPN VC interface
244