Display Mpls Te Link-Administration Admission-Control - HP 5800 series Command Reference Manual

<Sysname> display mpls te cspf tedb node
MPLS LSR-Id: 1.1.1.1
IGP Type: OSPF
MPLS-TE Link Count: 1
Link[1] :
Interface IP Address: 2.0.0.33, 2.0.0.35, 2.0.0.36,
Neighbor
Neighbor
IGP Area: 1
Link Type: point-to-point
IGP Metric: 100
MPLS LSR-Id: 1.1.1.1
IGP Type: ISIS
MPLS-TE Link Count: 2
Link[1] :
Interface IP Address: 2.0.0.33, 2.0.0.35, 2.0.0.36,
Neighbor
Neighbor
IGP Area: Level-0
Link Type: point-to-point
IGP Metric: 10
Table 64 Command output
Field
MPLS LSR-Id
Process Id
MPLS-TE Link Count
Link[1]
DR Address
IGP Metric
TE Metric
Color

display mpls te link-administration admission-control

Description
Use the display mpls te link-administration admission-control command to display information about CR-
LSPs carried either on the link of a specified interface or links of all interfaces if no interface is specified.
Process Id: 100
IP Address: 2.0.0.2, 2.0.0.42, 2.0.0.43,
2.0.0.44, 2.0.0.45, 2.0.0.46,
2.0.0.47, 2.0.0.32,
MPLS LSR-Id : 1.1.1.2
Link Status: Inactive
TE Metric: 100
Process Id: 100
IP Address: 2.0.0.2, 2.0.0.42, 2.0.0.43,
2.0.0.44, 2.0.0.45, 2.0.0.46,
2.0.0.47, 2.0.0.32, 2.0.0.33
MPLS LSR-Id: 1.1.1.2
Link Status: Active
TE Metric: 10
Color: 0xff
Color: 0x11
Description
MPLS LSR ID of node
IGP process ID
Number of MPLS TE links
Information of the first link
IP address of the DR
IGP metric of link
TE metric of link
Link administrative attribute
144