Display Mpls Nhlfe Reflist - HP 5800 series Command Reference Manual

Field
Tunnel ID
Out Interface
AT Index
Operation
LSP Type
Tunnel State
FRR Flag
FRR Tunnel State
Next Tunnel ID
Gr Count
Create Time
Last Change Time

display mpls nhlfe reflist

Description
Use the display mpls nhlfe reflist command to display the usage information of the NHLFE entries.
Syntax
display mpls nhlfe reflist token [ slot slot-number ] [ include text | { | { begin | exclude | include }
regular-expression } ]
View
Any view
Default level
1: Monitor level
Parameters
token: Specifies the NHLFE entry index. Its value ranges from 0 to 102,399.
include text: Displays the usage information of the NHLFE entries that contains a specified string. text is
the specified string.
slot slot-number: Displays the usage information of the NHLFE entries on a member device in the IRF
virtual device. The slot-number parameter is the member number of the device in the IRF virtual device.
The value range for the slot-number parameter depends on the number of members and numbering
conditions in the current IRF virtual device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
•
exclude: Displays all lines that do not match the specified regular expression.
•
include: Displays all lines that match the specified regular expression.
•
Description
Index of the NHLFE tunnel
Outgoing interface
Adjacency table index
Label operation type, which can be PUSH, SWAP, or GO
LSP type, which can be LDP LSP, CR-LDP/RSVP LSP, BGP LSP, L3VPN LSP,
STATIC LSP, STATIC CR-LSP, L2VPN LSP, BGP IPv6 LSP, or INVALID
Tunneling state, Done or Waiting
FRR flag, True or False
FRR tunnel state, Done or Waiting
ID of the nested tunnel
Number of times that GR occurs
Time when the entry was created
Time of the last update of the entry
78