70
5.2.3
Hook lubrication
The optimal oil quantity for hook lubrication is specified by the
factory. Hold a piece of blotting paper next to the hook and step
on the pedal.
Proper setting
1.
The regulating screw (1) must be tightened so that the
clamp (2) lightly grips the hose with lubricating wick (3).
2.
After sewing a path of approx. 1 m long, the blotting paper is
evenly sprayed with a thin layer of oil.
3.
The oil level must not raise above the MAX marking (5) or
drop below the MIN marking (6).
Pic. 25: Hook lubrication
①
②
(1) - Regulating screw
(2) - Clamp
(3) - Tube with lubricating wick
1.
Tilt the machine.
2.
Turn the regulating screw (1):
• Releasing more oil: turn counterclockwise (+)
• Releasing less oil: turn clockwise (-)
Operating Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
③
④
⑤
⑥
(4) - Oil filler opening
(5) - MAX marking
(6) - MIN marking
Maintenance