Table of Contents
Advertisement
Maintenance
Oil to be used:
The upper part of the machine and the hook may only be filled with
lubricating oil DA 10 or an oil of equivalent quality which has the
following properties:
•
•
6.2.2 Hook lubrication
Check the oil level for hook lubrication approx. once every week.
Fig. 27: Hook lubrication
(1) - Refill opening
(2) - Reservoir
Checking the oil level
1. Tilt the upper part of the machine backwards.
2. Check the quantity of oil in the reservoir (2).
Important: The oil level must always be between the minimum level
marking (3) and the maximum level marking (4).
3. Pour in oil through the refill opening (1) as required:
Operating manual 567 Version 01.0 - 01/2015
Viscosity at 40 °C: 10 mm²/s
Flash point: 150 °C
ATTENTION
Machine damage possible due to incorrect oil.
An incorrect oil type can cause damage to the machine.
Only use oil that complies with the data in the operating
manual.
1
4
2
3
(3) - Minimum level marking
(4) - Maximum level marking
43
Advertisement
Table of Contents
