Operating and programming the control unit
9.2 Switching on the sewing machine
1. Switch on the main switch.
The software version is shown in the display:
The machine references.
Instruction manual 650-16 Version 00.0 - 07/2013
Fig. 14: Firmware and software version display
• on the left of the screen is the control panel firmware
• On the right of the screen is the control unit software ver-
sion
The display shows the last program to be use
( Fig. 15) or manual mode ( Fig. 16).
Fig. 15: Displaying the last program to be used
Fig. 16: Display in manual mode
27