About This Guide
This guide contains information necessary to install and configure your ATM modules. This
information includes guiding you through the LAN emulation (LANE) client configuration
process to enable a successful module installation. Related documents are referenced in this
guide. These documents provide additional information about products that work with the
ATM modules, such as the LightStream 1010 and Catalyst 5000 devices.
Who Should Read This Guide
This manual is for technicians who install and maintain Catalyst 2900 series XL switches,
hereafter referred to as the Catalyst 2900 series switches. It is assumed that the individual
is familiar with 10BaseT, 100BaseT, and Asynchronous Transfer Mode (ATM) LAN
concepts and terminology.
This manual explains how to install the Catalyst 2900 series XL ATM modules (hereafter
referred to as the ATM modules) in the Catalyst 2900 series switch and configure its LAN
emulation client (LEC) software.
Related Publications
For detailed information about LANE and its usage in LAN environments, refer to the
following Cisco Systems publications:
•
Wide-Area Networking Configuration Guide
•
Catalyst 5000 Series Advanced Software Configuration Guide
•
Catalyst 5000 Series Command Reference
About This Guide vii