Ntp Client - D-Link DSL-2540U User Manual

Adsl/ethernet router with built-in switch

Hide thumbs Also See for DSL-2540U:

Table of Contents

DSL-2540U ADSL/Ethernet Router with Built-in Switch

User Manual

NTP Client

On the System / NTP client page, you can configure automatic synchronization of the system

time with a time server on the Internet.

To enable automatic synchronization with a time server:

1. Select the Enabled checkbox.

2. Select your time zone.

3. Specify the needed NTP server in the NTP servers field or leave the server specified by

default.

4. Click the Change button.

When the router is powered off or rebooted, the system time is reset to the default value.

If you have set automatic synchronization for the system time, the internal clock of the

device will be configured after connecting to the Internet.

Figure 82. The System / NTP client page.

Page 85 of 86

Configuring via Web-based Interface

Table of Contents