Wireless Settings - D-Link DIR-451 User Manual

Section  - Configuration
Enable Wireless: Check the box to enable the wireless function. If
you do not want to use wireless, uncheck the box
to disable all the wireless functions.
Wireless Network Service Set Identifier (SSID) is the name of your
wireless network. Create a name using up to 32
Name:
characters. The SSID is case-sensitive.
Indicates the channel setting for the DIR-451. By
Wireless Channel:
default the channel is set to 6. The Channel can
be changed to fit the channel setting for an existing
wireless network or to customize the wireless
network. The Auto Channel Scan setting can
be selected to allow the DIR-451 to choose the
channel with the least amount of interference.
Super G Mode: Super G is a group of performance enhancement
features that increase end user application
throughput in an 802.11g network. Super G
is backwards compatible to standard 802.11g
devices. For top performance, all wireless devices
on the network should be Super G capable. Select
either Disabled, Super G without Turbo, or Super
G with Dynamic Turbo.
• Disabled - Standard 802.11g support, no enhanced capabilities.
• Super G without turbo - Capable of Packet Bursting, FastFrames, Compression, but no Turbo mode.
• Super G with Dynamic Turbo - Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo.
This
all
D-Link DIR-451 User Manual

Wireless Settings

setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled when
devices on the wireless network are Super G with Dynamic Turbo enabled.
1