Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
show vtp
To display VTP statistics and domain information, use the show vtp command.
Syntax Description
counters
status
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History
Release
12.1(8a)EW
Examples
This example shows how to display VTP statistics:
Switch# show vtp counters
VTP statistics:
Summary advertisements received
Subset advertisements received
Request advertisements received
Summary advertisements transmitted : 31
Subset advertisements transmitted
Request advertisements transmitted : 0
Number of config revision errors
Number of config digest errors
Number of V1 summary errors
VTP pruning statistics:
Trunk
---------------- ---------------- ---------------- ---------------------------
Fa5/9
Switch#
This example shows how to display the VTP domain status:
Switch# show vtp status
VTP Version
Configuration Revision
Maximum VLANs supported locally : 1005
Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
78-16201-01
show vtp {counters | status}
Specifies VTP statistics.
Specifies VTP domain status.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Join Transmitted Join Received
1555
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
: 1
: 1
: 0
: 1
: 0
: 0
: 0
Summary advts received from
non-pruning-capable device
1564
0
: 2
: 250
: 33
: Server
: Lab_Network
: Enabled
: Enabled
: Disabled
show vtp
2-409