10.2
Configuring the IP address fax environment
Configuring basic settings for sending and receiving faxes using IP address
fax
Enable the IP address fax function. In addition, configure settings for sending and receiving faxes, sender
information of this machine, and operation mode for IP address fax.
1
In the administrator mode, select [Network] - [Network Fax Setting] - [Network Fax Function Settings],
and then set [IP Address Fax Function Settings] to [ON] (Default: [OFF]).
2
In the administrator mode, select [Network] - [Network Fax Setting] - [SMTP TX Setting], then configure
the following settings.
bizhub C754/C654
10
10-19