Konica Minolta bizhub C754 User Manual page 324

14
Settings
[Power Save Mode
Setting]
[Date Setting]
[Work Time Setting]
[Use Power Save]
[Use Overtime Password]
[Enable Tracking Function]
14-6
Managing the machine power for power saving
Description
Select a power save mode to which the machine enters based on the
weekly timer.
• [ErP Auto Power OFF]: A mode that provides a higher more effective
power saving effect. In this mode, you cannot receive all jobs.
• [Sleep]: This mode has a lower power saving effect than the [ErP Auto
Power OFF] mode; however, it allows you to receive print jobs from a
fax machine or computer. The received jobs are printed when the ma-
chine returns to the normal mode.
[Sleep] is specified by default.
Specify the date by day.
Specify the operating time for each day of the week. Select the check box
for a day of the week you wish to set the timer, and enter the time period
that power is turned on.
Select this check box if you wish to turn the power off when the machine
is not used during lunch break. Also enter the range of time during which
the power is turned off.
[OFF] (not selected) is specified by default.
Select this check box to restrict the use of this machine in the Power Save
mode using a password. Also enter the password (using up to eight char-
acters, excluding + and ").
To enter (change) the password, select the [Password is changed.] check
box, then enter a new password.
[OFF] (not selected) is specified by default.
Select this check box to use the learning function that automatically sets
the weekly timer schedule to fit your office use status.
To use the learning function, select [Auto Standby Adjustment Level] to
specify the level at which it is judged that this machine is inactive. As the
level is higher, it is more easily judged that this machine is inactive. There-
fore, the off time is set to a longer time.
Select the [Clear Usage Data] check box to delete data of the use status
learned in this machine and the schedule that is set automatically as the
learning result.
[ON] (selected) is specified by default.
14.1
bizhub C754/C654