In The Netware 4.X Remote Printer Mode (Nds) - Konica Minolta bizhub C754 User Manual

8
Settings
[Print Server Name]
[Print Server Pass-
word]
[Polling Interval]
[Bindery/NDS Setting]
[File Server Name]

In the NetWare 4.x Remote Printer mode (NDS)

1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select [Print Services Quick
Setup] from the Tools menu.
4
Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the
[Type] of the printer to [Other/Unknown] and save them.
5
Load the PSERVER.NLM file on the NetWare Server console.
6
Log in to the administrator mode of Web Connection.
8-24
Configuring the NetWare printing environment
Description
Enter a print server name to enable Pserver (using up to 63 characters, ex-
cluding /, \, :, ;, ,, *, [, ], <, >, |, +, =, ?, and .).
Enter the print server name registered in the Pconsole.
If necessary, enter a print server password (using up to 63 characters).
Set a job inquiry interval.
[1] sec. is specified by default.
Select [NDS/Bindery Setting].
[NDS] is specified by default.
Enter the priority file server name to be used in the Bindery emulation mode
(using up to 47 characters, excluding /, \, :, ;, ,, *, [, ], <, >, |, +, =, ?, and .).
8.8
bizhub C754/C654