Konica Minolta bizhub C754 User Manual page 458

17
Settings
[Port No.]
[Port Number (SSL)]
[Certificate Verification
Level Settings]
[Detail Settings]
[SMTP Authentica-
tion]
[POP Before SMTP
Authentication]
[POP Before SMTP
Time]
17-20
Description
If necessary, change the port number of the E-mail server (SMTP).
Normally, you can use the original port number.
[25] is specified by default.
If necessary, change the SSL communication port number.
Normally, you can use the original port number.
This option is available when [SMTP over SSL] is selected for [SSL/TLS
Settings].
[465] is specified by default.
To validate the certificate during SSL communication, select items to be
verified.
• [Expiration Date]: Confirm whether the certificate is within the validity
period. [Confirm] is specified by default.
• [Key Usage]: Confirm whether the certificate is used according to the
intended purpose approved by the certificate issuer. [Do Not Confirm]
is specified by default.
• [Chain]: Confirm whether there is a problem in the certificate chain (cer-
tificate path). The chain is validated by referencing the external certifi-
cates managed on this machine. [Do Not Confirm] is specified by
default.
• [Expiration Date Confirmation]: Confirm whether the certificate has ex-
pired. [Do Not Confirm] is specified by default.
• [CN]: Confirm whether CN (Common Name) of the certificate matches
the server address. [Do Not Confirm] is specified by default.
Configure SMTP authentication or POP before SMTP authentication ac-
cording to your environment.
Select whether to use SMTP authentication. If [ON] is selected, configure
the following settings. [OFF] is specified by default.
• [User ID]: Enter the user ID for SMTP authentication (using up to 64
characters).
• [Password]: Enter the password of the user name you entered into [Us-
er ID] (using up to 64 characters).
• [Domain Name]: Enter the domain name (realm) for SMTP authentica-
tion (using up to 253 characters). This item is necessary when the
SMTP authentication method is Digest-MD5.
Enter the domain name if two or more domains (realm) exist. When only
one domain (realm) exists, no entry is required. The domain name is no-
tified from the E-mail server (SMTP) at the initial communication, and
communication is automatically performed using that domain name.
• [Authentication Setting]: Select whether to synchronize the SMTP au-
thentication with the user authentication of this machine. This item is
necessary when the user authentication is installed on this machine.
[Use Set Value]: Uses values entered at [User ID] and [Password].
[Use User Auth. ID and Password]: Uses the user name and password
of the registered user of this machine as [User ID] and [Password] for
the SMTP authentication.
[Use Set Value] is specified by default.
Select whether to use POP before SMTP.
Configure the setting if your environment requires the POP Before SMTP
Authentication for sending an E-mail.
[OFF] is specified by default.
If necessary, change the waiting time until starting E-mail transmission af-
ter the POP authentication is successful.
[5 sec.] is specified by default.
bizhub C754/C654