Using Ssl Communication - Konica Minolta bizhub C754 User Manual

7.7 Searching for a destination using the LDAP server

Using SSL communication

Communication between this machine and the LDAP server is encrypted with SSL.
Configure the setting if your environment requires SSL encryption communication with the LDAP server.
To make SSL communications, enable SSL. In addition, specify how to verify the certificate.
In the administrator mode, select [Network] - [LDAP Setting] - [Setting Up LDAP] - [Edit], then configure the
following settings.
Settings
[Enable SSL]
[Port Number (SSL)]
[Certificate Verification
Level Settings]
[Validity Period]
[CN]
[Key Usage]
[Chain]
bizhub C754/C654
Description
Select this check box to use SSL communication.
[OFF] (not selected) is specified by default.
If necessary, change the SSL communication port number.
Normally, you can use the original port number.
[636] is specified by default.
To verify the certificate, select items to be verified.
If you select [Confirm] at each item, the certificate is verified for each item.
Confirm whether the certificate is still valid.
[Confirm] is specified by default.
Confirm whether CN (Common Name) of the certificate matches the server
address.
[Do Not Confirm] is specified by default.
Confirm whether the certificate is used according to the intended purpose
approved by the certificate issuer.
[Do Not Confirm] is specified by default.
Confirm whether there is a problem in the certificate chain (certificate path).
The chain is validated by referencing the external certificates managed on
this machine.
[Do Not Confirm] is specified by default.
7
7-37