16.2
Associating via OpenAPI
Configuring the basic OpenAPI settings
Enable the SSDP function. If necessary, change the OpenAPI communication port number.
1
In the administrator mode, select [Network] - [SSDP Settings], then configure the following settings.
Settings
[SSDP]
[Multicast TTL Setting]
bizhub C754/C654
Description
Select [ON] to use the OpenAPI.
This allows for the following actions:
•
Notifying of OpenAPI service having started on this machine.
•
Returning a response to a search for OpenAPI service.
[ON] is specified by default.
Change TTL (Time To Live) for SSDP multi-cast packet if necessary.
The value is decremented by one each time a communication is estab-
lished via the router. When the value reaches 0, packets are discarded.
[1] is specified by default.
16
16-7