[Ike Settings]; [Ipsec Sa Settings] - Konica Minolta bizhub C754 User Manual
Hide thumbs
Also See for bizhub C754:
- User manual (427 pages) ,
- Quick start manual (130 pages) ,
- Shortcut manual (33 pages)
Table of Contents
Advertisement
17
[IKE Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IPsec Settings] - [IPsec
Settings] - [IKE Settings]
Configure settings required to create a common key for IPsec.
Settings
[IKEv1 Settings] or [IKEv2
Settings]
[Encryption Algorithm]
[Authentication Algo-
rithm]
[Diffie-Hellman Group]
[Key Validity Period]
[Negotiation Mode]
[IPsec SA Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IPsec Settings] - [IPsec
Settings] - [IPsec SA Settings] - [Edit]
Configure SA (Security Association) required for encrypted communication. Up to 10 groups can be regis-
tered for the SA.
Select a group, then press [Edit].
Settings
[ON]/[OFF]
[Group Name]
[Encapsulation Mode]
[Security Protocol]
[Key Exchange Method]
[Lifetime After Establishing
SA]
Tips
-
To check the registered SA settings, select a group name, then press [Mode Check].
17-8
Description
Select [IKEv1 Settings] or [IKEv2 Settings] depending on your IKE version.
Select the encryption algorithm to create a common key used for commu-
nication.
Select the authentication algorithm to create a common key used for com-
munication.
Select the Diffie-Hellman group.
[Group 2] is specified by default.
Specify the validity period of a common key to securely create a common
key used to encrypt communications. When this period has expired, a new
key is created. This can secure the communication.
[28800] is specified by default.
Select the method to securely create a common key used to encrypt com-
munications. This option is not available in [IKEv2 Settings].
[Main Mode] is specified by default.
Description
To register SA, select [ON].
[OFF] is specified by default.
Enter the SA name (using up to 10 characters).
Select an IPsec operation mode.
[Transport Mode] is specified by default.
Select a security protocol.
Select the key replacement method to securely create a common key used
to encrypt communications.
When using a device that does not support the automatic key replacement
by IKE, select [Manual Key] to manually configure detailed parameters.
[IKEv1] is specified by default.
Enter the lifetime of a common key used to encrypt communications.
[3600] is specified by default.
bizhub C754/C654
Advertisement
Table of Contents
