10
Settings
[Port Number]
[Connection Timeout]
3
In the administrator mode, select [Network] - [Network Fax Setting] - [SMTP RX Setting], then configure
the following settings.
Settings
[SMTP RX]
[Port Number]
[Connection Timeout]
10-20
Configuring the IP address fax environment
Description
If necessary, change the port number of the E-mail server (SMTP).
Normally, you can use the original port number.
[25] is specified by default.
Change the timeout period for a communication with the E-mail server
(SMTP), as required.
[60] sec. is specified by default.
Description
Select [ON] to use the IP address fax function.
[ON] is specified by default.
If necessary, change the port number of the E-mail server (SMTP).
Normally, you can use the original port number.
[25] is specified by default.
Change the timeout period for a communication with the E-mail server
(SMTP), as required.
[300] sec. is specified by default.
10.2
bizhub C754/C654