Konica Minolta bizhub C754 User Manual page 437

16.10 Operating the machine Control Panel remotely
Settings
[Client Setting]
[Server Address]
[Port Number]
[Connection Timeout]
[Certificate Verification
Level Settings]
[Validity Period]
[CN]
[Key Usage]
[Chain]
[Expiration Date Con-
firmation]
[Synchronize WebDAV Cli-
ent Setting]
[Proxy Settings]
[Proxy Server Ad-
dress]
[Proxy Server Port
Number]
[User Name]
[Password]
d
Reference
In the administrator mode, select [Security] - [Certificate Verification Settings], then configure whether to ver-
ify the certificate. The certificate is verified by default. For details, refer to page 13-11.
bizhub C754/C654
Description
To control the Control Panel of this machine remotely using the dedicated
software, select [ON].
[OFF] is specified by default.
Enter the address of the server where the dedicated software was installed.
Use one of the following formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
If necessary, change the port number of the server where the dedicated
software was installed.
[443] is specified by default.
If necessary, change the timeout time of communication with the server
where the dedicated software was installed.
[60] sec. is specified by default.
To verify the certificate, select items to be verified.
If you select [Confirm] at each item, the certificate is verified for each item.
Confirm whether the certificate is still valid.
[Do Not Confirm] is specified by default.
Confirm whether CN (Common Name) of the certificate matches the server
address.
[Do Not Confirm] is specified by default.
Confirm whether the certificate is used according to the intended purpose
approved by the certificate issuer.
[Do Not Confirm] is specified by default.
Confirm whether there is a problem in the certificate chain (certificate path).
The chain is validated by referencing the external certificates managed on
this machine.
[Do Not Confirm] is specified by default.
Confirm whether the certificate has expired.
Confirm for expiration of the certificate in the following order.
• OCSP (Online Certificate Status Protocol) service
• CRL (Certificate Revocation List)
[Do Not Confirm] is specified by default.
Select whether to use the proxy server for WebDAV transmission as a
proxy server for the server where the dedicated software was installed.
To use a different proxy server, select [OFF] and enter the proxy server in-
formation.
[ON] is specified by default.
If you set the [Synchronize WebDAV Client Setting] to [OFF], register the
proxy server.
Enter the proxy server address.
Use one of the following formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
If necessary, change the proxy server port number.
[8080] is specified by default.
Enter the user name to log in to the proxy server (using up to 63 charac-
ters).
Enter the password of the user name you entered into [User Name] (using
up to 63 characters).
To enter (change) the password, select the [Password is changed.] check
box, then enter a new password.
16
16-25