Creating A Relay User Box - Konica Minolta bizhub C754 User Manual

11.2 Creating and editing a System User Box
11.2.2

Creating a Relay User Box

Relay User Box is a box used to relay data when you use this machine as a relay machine to the facsimile.
If you use the Relay Distribution and when you send a fax to the relay machine, it distributes the fax to all
recipients being registered in the Relay User Box.
If you are using broadcasting to distant places, you can reduce the total communication cost by using the
relay machine.
Tips
- To use Relay User Box, an optional Fax Kit is required.
In the administrator mode, select [Box] - [Create System User Box] - [Relay User Box], then configure the
following settings.
Settings
[User Box Number]
[User Box Name]
[Relay Address]
[Relay TX Password]/[Re-
type Relay TX Password]
bizhub C754/C654
Description
Registration number of the box. Select [Use opening number] to automat-
ically assign the smallest available number. When specifying a number, se-
lect [Input directly], and enter a value between 1 and 999999999.
Enter the User Box name (using up to 20 characters).
Assign a name that helps you easily identify the User Box.
Click [Search from List], and select a group in which fax destinations are
registered.
When registering a group destination as a relay destination, be sure to set
the fax address in the group destination in advance.
To restrict the usage of User Box using password, enter the password (us-
ing up to eight characters).
The entered password is required when sending a relay request to this ma-
chine. Inform the sender who want to use this machine as a relay machine
of the password you entered here.
11
11-7