Registering A Fax Address Program - Konica Minolta bizhub C754 User Manual

15.3 Registering a program
15.3.6

Registering a fax address program

A program can be registered or edited using Web Connection. Although character input is a difficult process
using the Touch Panel, it can be carried out easily if you use the computer.
A combination of address information and the fax/scan transmission option settings can be registered in a
program.
The following describes the fax address program.
In the administrator mode, select [Store Address] - [Program] - [Registration] - [Fax], then click [OK] to con-
figure the following settings.
Settings
[Name]
[Destination Informa-
tion]
[Basic Setting]/[Appli-
cation Setting]
[Limiting Access to
Destinations]
bizhub C754/C654
Description
Enter the program name (using up to 24 characters).
Assign a name that helps you easily identify the program.
Click [Search from List], and select a destination fax address from the list.
Click [Check Destination] to check registered address books.
If you wish to manually enter a destination fax address, select [Direct Input]
and enter the address.
• [Destination]: Enters the destination fax number.
• [Line Setting]: If two lines are used, select the line used to send a fax. If [No
Selection] is selected, either line, whichever is not busy, is used for trans-
mission.
• [Communication Setting]: As necessary, specify how to send a fax to a
destination you wish to register.
Only one destination can be specified.
Configure the fax transmission option settings.
For details, refer to page 15-27.
Limit access to this destination, if necessary.
For details, refer to page 12-46.
15
15-21