Konica Minolta bizhub C754 User Manual page 375

15.1 Registering address books
Settings
[Host Address]
[File Path]
[User ID]
[Password]
[anonymous]
[PASV Mode]
[Proxy]
[Port No.]
[Limiting Access to Desti-
nations]
bizhub C754/C654
Description
Enter the host name or IP address of the destination FTP server (using up
to 253 characters).
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Enter the name of a destination folder in the FTP server specified in [Host
Address] (using up to 127 characters).
• Entry example: "scan"
If authentication is required in the destination FTP server, enter the availa-
ble user name to log in (using up to 64 characters).
Enter the password of the user you entered into [User ID] (using up to 64
characters, excluding ").
When authentication is not required in the destination FTP server, select
[ON].
[OFF] is specified by default.
When the PASV mode is used in your environment, select [ON].
[OFF] is specified by default.
When a proxy server is used in your environment, select [ON].
[OFF] is specified by default.
If necessary, change the port number.
Normally, you can use the original port number.
[21] is specified by default.
Limit access to this destination, if necessary.
For details, refer to page 12-46.
15
15-5