Canceling Stamp Setting When Sending A Fax - Konica Minolta bizhub C754 User Manual

9
Settings
[Min. Reduction for RX
Print]
[Print Separate Fax Pages]
[File After Polling TX]
[No. of Sets (RX)]
[Individual Receiving Line
Setup]
[Individual Sender Line
Setup]
[Fax RX Print Setting]
9.2.3

Canceling stamp setting when sending a fax

You can automatically cancel stamp setting when sending a fax without a stamp.
In the administrator mode, select [System Settings] - [Stamp Settings] - [Fax TX Settings], then set [Cancel
Setting] to [Cancel].
9-8
Specifying operations when sending and receiving a fax
Description
If necessary, change the reduction ratio that is used when printing a fax.
[96%] is specified by default.
Select whether to print a fax longer than the standard size on separate pag-
es.
This option is not available if [Duplex Print (RX)] is set to [ON].
[OFF] is specified by default.
Select whether to delete a file after it is sent in response to a polling request
if Polling TX is used to register files for polling.
[Delete] is specified by default.
If necessary, change the number of copies to print a fax.
[1] is specified by default.
Specify whether to receive faxes via respective lines separately if two lines
are operating.
In receiving faxes per line, you can use reception functions, such as TSI
Routing and Forward TX.
[OFF] is specified by default.
Specify whether to use different sender names for the respective lines if
two lines are operating.
[OFF] is specified by default.
Select whether to print a received network fax in color or black and white.
To restrict the print to only black and white print, select [Black Only].
[Full Color/Black] is specified by default.
9.2
bizhub C754/C654