7.4
Configuring the WebDAV transmission environment
Configuring basic settings for the WebDAV transmission
Enable the WebDAV transmission. In addition, configure the settings for connecting to the WebDAV server.
In the administrator mode, select [Network] - [WebDAV Settings] - [WebDAV Client Settings], then configure
the following settings.
Settings
[WebDAV TX Setting]
[Chunk Transmission]
[Connection Timeout]
[Server Authentication
Character Code]
bizhub C754/C654
Description
Select [ON] to use the WebDAV transmission function.
[ON] is specified by default.
Select whether to transmit data by dividing it into some chunks.
Configure the setting if your WebDAV server supports chunk transmission.
[OFF] is specified by default.
If necessary, change the time-out time to limit a communication with the
WebDAV server.
[60] sec. is specified by default.
Select a character code to perform the authentication under the WebDAV
server.
You can use this setting when [Japanese] is specified for the language to
be displayed on the Touch Panel.
[UTF-8] is specified by default.
7
7-23