[Netware Settings]; [Ipx Settings]; [Netware Print Settings] - Konica Minolta bizhub C754 User Manual

17

[NetWare Settings]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [NetWare Settings]
Configure the settings for using this machine in a NetWare environment.
Pressing [OK] finalizes a change of settings.
Settings

[IPX Settings]

[NetWare Print Settings]

[User Authentication Set-
ting (NDS)]
[IPX Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [NetWare Settings] - [IPX Settings]
Select whether to use IPX. When using IPX, select the Ethernet frame type according to your environment.
Settings
[ON]/[OFF]
[Ethernet Frame Type]
[NetWare Print Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [NetWare Settings] - [NetWare Print Set-
tings]
Configure the NetWare printing environment.
Settings
[ON]/[OFF]
[NetWare Print Mode]
[PServer]
[Nprinter/Rprinter]
[Status]
17-12
Description
Select whether to use IPX. When using IPX, select the Ethernet frame type
according to your environment.
Configure the NetWare printing environment.
Select whether to use the NDS (Novell Directory Service) authentication.
Description
Select whether to use IPX.
[OFF] is specified by default.
Select the Ethernet frame type according to your environment.
[Auto Detect] is specified by default.
Description
Select whether to enable NetWare printing.
[OFF] is specified by default.
Select an operation mode of the print server according to your environ-
ment.
[PServer] is specified by default.
Press [PServer] to configure settings for using this machine as PServer.
• [Print Server Name]: Enter the print server name (using up to 63 char-
acters).
• [Print Server Password]: If necessary, enter a print server password
(using up to 63 characters).
• [Polling Interval]: Specify a job inquiry interval. [1] is specified by de-
fault.
• [NDS/Bindery Setting]: Select [NDS] or [NDS & Bindery]. [NDS] is spec-
ified by default.
• [File Server Name]: Enter the priority file server name to be used in the
Bindery emulation mode (using up to 47 characters).
• [NDS Context Name]: Enter the context name of the NDS to be con-
nected via the print server (using up to 191 characters).
• [NDS Tree Name]: Enter the tree name of the NDS to be connected via
the print server (using up to 63 characters).
Press [Nprinter/Rprinter] to configure settings for using this machine as
Nprinter or Rprinter.
• [Print Server Name]: Enter the print server name (using up to 63 char-
acters).
• [Printer Number]: Enter the printer number.
Allows you to check the server name, queue name, or queue status.
bizhub C754/C654