Registering The Host Name - Konica Minolta bizhub C754 User Manual

5
Settings
[Secondary DNS Server1]
to [Secondary DNS
Server2]

Registering the host name

If your DNS server supports the Dynamic DNS function, registering the host name to this machine enables
the DNS server to resolve the host name and IP address name dynamically. Doing this enables a computer
on the network to connect to this machine using the host name.
In the administrator mode, select [Network] - [TCP/IP Setting] - [TCP/IP Setting], then configure the following
settings.
Settings
[DNS Host Name]
[Dynamic DNS Setting]
5-6
Description
When using multiple DNS servers, enter the address of your secondary
DNS server.
Description
Enter the host name of this machine (using up to 63 characters, including
only - for symbol marks). Any symbol cannot be prefixed or suffixed to the
host name.
Select [Enable] to use the Dynamic DNS function.
If your DNS server supports the Dynamic DNS function, the set host name
can be automatically registered to the DNS server or changes can be au-
tomatically updated.
[Disable] is specified by default.
Using in the IPv4 environment
bizhub C754/C654
5.1