7
Using the WINS server
If the WINS server is installed to resolve the name, set the WINS server address and the name resolution
method.
In the administrator mode, select [Network] - [SMB Setting] - [WINS Setting], then configure the following set-
tings.
Settings
[WINS]
[Auto Obtain Setting]
[WINS Server Address1] to
[WINS Server Address2]
[Node Type Setting]
7-16
Configuring the SMB transmission environment
Description
Select [ON] to use the WINS server.
[ON] is specified by default.
Select [Enable] to automatically obtain the WINS server address.
This item is necessary when DHCP is enabled.
[Enable] is specified by default.
Enter the WINS server address.
This item is necessary when you do not automatically obtain the WINS
server address using the DHCP.
Use the following entry formats.
•
Example of entry: "192.168.1.1"
Select the name resolution method.
•
[B Node]: Query by broadcast
•
[P Node]: Query the WINS server
•
[M Node]: Query by broadcast, and then query the WINS server
•
[H Node]: Query the WINS server, and then query by broadcast
[H Node] is specified by default.
7.2
bizhub C754/C654