Using The Pop Before Smtp Authentication - Konica Minolta bizhub C754 User Manual

7

Using the POP Before SMTP Authentication

Configure the setting if your environment requires the POP Before SMTP Authentication for sending an E-
mail.
The POP Before SMTP authentication is a function that performs POP authentication using the E-mail server
(POP) before sending an E-mail and allows E-mail transmission only when the authentication is successful.
To use the POP Before SMTP authentication, enable the POP Before SMTP on this machine. In addition, con-
figure settings for connecting to the E-mail server (POP) used for authentication.
1
In the administrator mode, select [Network] - [E-mail Setting] - [E-mail TX (SMTP)], and configure the
following settings.
Settings
[POP before SMTP]
[POP before SMTP Time]
7-10
Configuring the Scan to E-mail environment
Description
Select [ON] to use the POP Before SMTP.
[OFF] is specified by default.
If necessary, change the waiting time until starting E-mail transmission af-
ter the POP authentication is successful.
Depending on your environment, it may take time before the E-mail trans-
mission is allowed after the POP authentication is successful. In that case,
if a time period that is too short is specified, E-mail transmission may fail.
[5] sec. is specified by default.
7.1
bizhub C754/C654