Using The Smtp Authentication - Konica Minolta bizhub C754 User Manual

7

Using the SMTP authentication

Configure the setting if your environment requires the SMTP authentication for sending an E-mail.
If the SMTP authentication is used, the user ID and password is sent from this machine when sending an E-
mail to perform authentication.
To use the SMTP authentication, enable the SMTP authentication on this machine. In addition, enter infor-
mation required for authentication.
In the administrator mode, select [Network] - [E-mail Setting] - [E-mail TX (SMTP)], and configure the following
settings.
Settings
[SMTP Authentication]
[User ID]
[Password]
7-8
Configuring the Scan to E-mail environment
Description
Select this check box to use the SMTP authentication.
As the authentication method of SMTP authentication, the highest level
method supported by your E-mail server (SMTP) is automatically selected
from the following methods.
• Digest-MD5
• CRAM-MD5
• PLAIN
• LOGIN
[OFF] (not selected) is specified by default.
Enter the user ID for SMTP authentication (using up to 64 characters).
Enter the password of the user name you entered into [User ID] (using up
to 64 characters, excluding ").
To enter (change) the password, select the [Password is changed.] check
box, then enter a new password.
7.1
bizhub C754/C654