Registering An Ftp Destination - Konica Minolta bizhub C754 User Manual

15
Settings
[Registration Certification
Information]
[Limiting Access to Desti-
nations]
15.1.2

Registering an FTP destination

An FTP destination can be registered or edited using Web Connection. Although character input is a difficult
process using the Touch Panel, it can be carried out easily if you use the computer.
In the administrator mode, select [Store Address] - [Address Book] - [New Registration] - [FTP], then click
[OK] to configure the following settings.
Settings
[No.]
[Name]
[Index]
15-4
Description
To encrypt E-mail messages using S/MIME, select this check box and reg-
ister a user's certificate. Click [Browse], and specify the location of the cer-
tificate to be registered.
• To register the certificate, the E-mail address must be matched be-
tween the certificate and the destination to be registered.
• Only the DER (Distinguished Encoding Rules) format is supported as a
file of certificate information.
Limit access to this destination, if necessary.
For details, refer to page 12-46.
Description
Destination registration number. [No.] is automatically registered from a
lower number that is not used. When specifying a number, select [Direct
Input], and enter a value between 1 and 2000.
Enter the destination name with 24 characters.
Assign a name that helps you easily identify the destination.
Select a corresponding character so that the destination can be index
searched by registration name.
• For a frequently used destination, select also the [Main] check box. If
the [Main] check box is selected, the destination will appear in the main
screen of the fax/scan mode, enabling the user to easily select a desti-
nation.
Registering address books
bizhub C754/C654
15.1