Manually Configuring Region To Region Replication - 3Com VCX V7000 Maintenance Manual

Manually
Configuring Region
to Region
Replication
For multi-site configurations with 2 Regions, each region contains a
replicated copy of the other region's database.
For example, consider a multi-site configuration with two regions, Region
1 and Region 2. Each region has two Authentication and Directory server
databases.
R1DB is the primary database located on Region 1.
■
R2DB' is Region 2's replicated database located on Region 1
■
R2DB is the primary database located on Region 2.
■
R1DB' is Region 1's replicated database located on Region 2.
■
This section provides instructions on how to install a replicated VCX
Authentication and Directory server database.
1 Install the Region 2 VCX Authentication and Directory server database
(R2DB') on the VCX Authentication and Directory server for Region 1.
a Log on as cworks on the primary Region 1 VCX Authentication and
Directory server and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./installVcxdata
b Select option 2 to BACKUP ROCSA.
c Enter the VCX Site ID of Region 2 when prompted.
The
Do you want to continue with the above settings ? [n/y]
prompt appears.
d Enter .
y
2 Install the Region 1 VCX Authentication and Directory server database
(R1DB') on the VCX Authentication and Directory server for Region 2.
a Log on as cworks on the primary Region 2 VCX Authentication and
Directory server and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./installVcxdata
b Select option 2 to BACKUP ROCSA.
c Enter the VCX Site ID of Region 1 when prompted.
The
Do you want to continue with the above settings ? [n/y]
prompt appears.

Manually Configuring Region to Region Replication

93