3Com VCX V7000 Maintenance Manual page 193

depends on how the servers have been installed and how replication has
been set up.
To upgrade the Authentication and Directory server in Region 1:
1 Log in, as root, to the Call server in Region 1.
2 Stop the Tomcat process by entering the following commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3 Log in, as root, to the Authentication and Directory server in Region 1.
4 Ensure that database replication has no errors (see
then drop replication by entering the following commands:
cd /opt/3com/VCX/vcxdata/bin
su cworks
./dropReplication
The drop replication script starts. Follow these steps:
a The
Enter the VCX Site Identification i.e. Site Id
appears.
Enter the site ID configured for Region 1.
b The
Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE
Enter the number of Master sites. To determine the number of Master
sites associated with this server, use the listVcxdata command. See
Manually Configuring Replication for an IP Telephony Server or IP
Telephony and Messaging Server
example, there is one Master site, Region 2.
c The
Enter the MASTER DEFINITION SITE IP Address [IP
prompt appears.
address]
Enter the IP address of the Master Definition site. This is the IP address
of the eth0 interface on this server (the Authentication and Directory
server in Region 1).
d The
Enter the MASTER SITE 1 IP Address [0.0.0.0]
appears.
Enter the IP address of the Master Site. This is the IP address of the
eth0 interface on the Authentication and Directory server in Region 2.
If there are more than one Master Sites, this question repeats until the
number of master sites specified in step b is reached.
Upgrading a Multi-Site VCX System with Branch Offices
: prompt appears.
for more information. In this
193
Preliminary Steps) and
prompt
prompt