Upgrading The Primary Vcx Server - 3Com VCX V7000 Maintenance Manual

Upgrading the
Primary VCX Server
Enter the IP address of the Master Site. This is typically the IP address
of the secondary VCX server.
e The
Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter to continue. The script executes.
y
4 Enter the following command to exit the cworks account and return to
the root account:
exit
5 Stop IP Messaging, first on the primary VCX server and then on the
secondary VCX server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S60ums stop
6 Obtain a copy of the
place it in the
/opt/installtemp
and on the secondary VCX server. The variable
VCX software (for example,
current version. The letter
Next, execute the following steps in the order listed:
Upgrade the primary VCX server. See
■
Server.
Upgrade the secondary VCX server. See
■
Server.
Set up database replication on the primary VCX server. See
■
Database Replication.
Follow the steps in this section to upgrade the primary VCX server.
1 To start the upgrade process, enter these commands on the primary VCX
server:
cd /opt/installtemp
tar xvf vcx-all-7.1.yc.tar
cd upgrade-7.1.yc
./install-upgrade
The system may prompt you to confirm that a new operating system
version will be installed and indicates which disk partition will be used
after the upgrade. If you see such a prompt, answer y.
Upgrading a Single-Site System With Two Servers
vcx-all-7.1.yc.tar
directory on the primary VCX server
vcx-all-7.0.3c.tar)
is always appended to the version number.
c
Upgrading the Primary VCX
software upgrade file and
indicates the version of
y
that will replace the
Upgrading the Secondary VCX
Set Up
221