3Com VCX V7000 Maintenance Manual page 282

282 A C: U
PPENDIX PGRADING
VCX S S F
ERVER OFTWARE ROM
d Switch to the new software version by entering the following
command:
vcx-switchversion 7.0.xc
e Specify whether this IP Messaging system will support IP Messaging
clients. The upgrade script displays the following prompt for the
primary IP Messaging server only:
Will this system support IPMSG client systems? [N]:
IP Messaging can be deployed in a client/server configuration to
support more users and distribute services.
If you enter N, this system will be configured as the primary IP
■
Messaging server and no client configuration prompts will appear.
If you enter Y, this system will be configured as the primary IP
■
Messaging server and you will be asked to identify the IP
Messaging clients associated with this server. The following
prompts appear:
A list of each of the IPMSG client systems' IP addresses
and hostnames is required. Enter a blank input to
indicate that all clients have been entered.
IP address of IPMSG client 1
Client IP Address:
f Enter the IP address of the first IP Messaging client system.
The following prompts appear:
Hostname of IPMSG client 1
Client Hostname:
g Enter the hostname of the first IP Messaging client system.
You can identify 20 IP Messaging client systems. The client
configuration prompts appear until you reach the maximum (20
entries) or until you press Enter without entering a IP address.
When you finish identifying IP Messaging client systems, the following
prompt appears:
Do you wish to change any of the IP Messaging
Service parameters? [N]:
V6.0 V7.0
TO