3Com VCX V7000 Maintenance Manual page 226

226 A B: U
PPENDIX PGRADING
VCX S S
ERVER OFTWARE
The drop replication script starts. Follow these steps:
a The
Enter the VCX Site Identification i.e. Site Id
appears.
Enter site ID configured for this system. For single-site systems, the site
ID is identical for both the primary IP Telephony server and the
secondary IP Telephony server.
b The
Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE
Press Enter to accept the default.
c The
Enter the MASTER DEFINITION SITE IP Address [IP
prompt appears.
address]
Enter the IP address of the Master Definition site or press Enter if the
displayed address is correct. This is typically the IP address of eth0 on
the primary VCX server.
d The
Enter the MASTER SITE 1 IP Address [0.0.0.0]
appears.
Enter the IP address of the Master Site. This is typically the IP address
of eth0 on the secondary VCX server.
e The
Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter to continue. The script executes.
y
4 Enter the following command to exit the cworks account and return to
the root account:
exit
5 Stop IP Messaging, first on the primary IP Messaging server and then on
the secondary IP Messaging server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S60ums stop
6 Obtain a copy of the
and place it in the
Telephony server and on the secondary IP Telephony server. The variable
indicates the version of VCX software (for example,
vcx-all-7.0.3c.tar)
always appended to the version number.
F V7.1. V7.1.
ROM X TO Y
[1]: prompt appears.
vcx-softswitch-7.1.yc.tar
directory on the primary IP
/opt/installtemp
that will replace the current version. The letter
prompt
prompt
software upgrade file
y
is
c