3Com VCX V7000 Maintenance Manual page 119

Sample VCX Reconfiguration Script (continued)
Do you wish to change any of the IP Messaging System parameters? [N] :
--------- Configuring additional parameters for Auth & Dir Service ---------
At a branch office, the password for access to the regional office system's
'cworks' account is required.
system, specify the 'cworks' password for access to *this* system.
Login Password
Login Password (confirm)
Do you wish to change any of the Auth & Dir Service parameters? [N] :
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination
The Trap Community String provides a community string to be used when
sending SNMP traps to the trap destination.
Trap Community String
Press the Enter or Return key to accept the data that you have accepted
or changed. To review the data and make additional changes, enter Y.
At a regional office or on a standalone
This cworks password is used for authentication when replicating this
server's database on a remote Authentication and Directory server. This
password must be the same as the cworks account password on the
remote server. It is not necessarily the same as the password used to log
in to the local cworks account configured earlier in this script.
Press the Enter or Return key to accept the default answer (N) and make
no further changes. If you want to make additional changes, enter Y.
Press the Enter or Return key to accept the IP address of the existing
Network Management Station or enter a new IP address. In this sample
script, the address remains unchanged.
Press the Enter or Return key to accept the existing trap community string
or enter a new string.
Sample VCX Server Reconfiguration
:
:
: 10.230.64.70
: public
119