Restarting A Service - 3Com VCX V7000 Maintenance Manual

58 C 3: M
HAPTER ANAGING

Restarting a Service

Enabling Message
Tracing
VCX S
ERVERS
To restart the Accounting service or the Authentication and Directory
service:
1 Log in to the server hosting the service you want to restart using the root
account.
2 Enter the following commands:
cd /opt/3com/VCX/scripts/rc3.d
./<back-end server> restart
For
<back-end server>
For an Accounting service enter
■
For an Authentication and Directory service enter
■
The files acctxmlconfig.xml (Accounting service) and vcxdataconfig.xml
(Authentication and Directory service) each have a setting to enable
message tracing through formatted Abstract Symbolic Notation (ASN.1).
This produces an understandable output that can be used for trouble
locating and clearing.
ASN.1 is a message formatting and encoding standard which is the basis
of the 3Queue protocol used between Tier 2 and Tier 3.
To enable message tracing:
1 Log in to the server hosting the service using the root account.
2 Stop the service (see
3 Enter the following command to change directories:
cd /opt/3com/VCX/<schema>/conf
For , enter
<schema>
for the Authentication and Directory service.
4 Edit the acctxmlconfig.xml file or the vcxdataconfig.xml file, and enable
Formatted ASN Packet Tracing.
Example:
<!-- Formatted ASN packet Tracing-->^M
<!-- 0 = OFF, 1 = ON -->^M
<ASNTRACE VALUE = "1"/>
5 Start the service (see
The logs are written to the directory that the back-end server is run from:
/opt/3com/VCX/<schema>/log
, enter one of the following identifiers:
S40acctxml
Stopping a Service).
for the Accounting service or enter
acctxml
Starting a Service).
S20vcxdata
vcxdata