Qdr File Maintenance - 3Com VCX V7000 Maintenance Manual

50 C 3: M
HAPTER ANAGING
QDR File
Maintenance
VCX S
ERVERS
Accounting server, do not change this setting. The Call Records service
will purge CDRs from the Accounting server after collecting them.
If you do not have Call Records service, change this setting to
AUTO_CLEAN_IF_NO_LATEST_UPDATE="Y"
Accounting service.
The variable
AUTO_CLEAN_IF_NO_LATEST_UPDATE_INTERVAL
hours (four days) by default. A smaller value initiates the self-cleaning
more often. A larger value allows the CDRs to remain on the Accounting
server longer.
5 Save your changes.
You can also configure the Accounting service to be self-cleaning by
modifying the itbes_xml_cdr.mib variables:
■ itbesCdrAutoCleanIfLatestStale
■ itbesCdrAutoCleanIfLatestStalePeriod
Management of QDRs storage is similar to CDR management except that
QDR generation is disabled by default (see
QDRs are not collected by the Call Records service. You can, however,
configure the Accounting service to be self-cleaning by editing the
Accounting service configuration file or modifying the appropriate SNMP
MIB variables.
To modify the Accounting service configuration file:
1 Log in to the server running the Accounting service using the root
account.
2 Enter the following command:
cd /opt/3com/VCX/acctxml/conf/
3 Use an editor to open the following file:
acctxmlconfig.xml
4 In the
<CONFIGURATION_INFO>
<BES_QOSFILE_CONFIG>
AUTO_CLEAN_IF_NO_LATEST_UPDATE="N"
AUTO_CLEAN_IF_NO_LATEST_UPDATE_INTERVAL="96"
The first variable determines whether or not QDRs are purged.
By default, the variable
to enable self-cleaning on the
QoS Monitoring
section, locate the
subsection and find the following variables:
AUTO_CLEAN_IF_NO_LATEST_UPDATE
is set to 96
Statistics) and
is set to N.